Upper Gearbox Mount Insert

kr 450,00
Nr 41 on diagram. Requires 1 per car. PFF85-441BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits - Sharper throttle response - More accurate gear changes - Reduced wheel-hop - Improved Traction - Prolonged mount life. Does not fit S3 8L.
Kjøp

Upper Engine Mount Insert

kr 450,00
Nr 40 on diagram. Requires 1 per car. PFF85-440BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits: Sharper throttle response More accurate gear changes Reduced wheel-hop Improved Traction Prolonged mount life
Kjøp

Front Subframe Rear Bush

kr 590,00
Nr 24 on diagram. Requires 2 per car.
Kjøp

Front Strut Top Mount Bush -10mm

kr 750,00
Nr 11 on diagram. Requires 2 per car. This part has been designed to give an extra 10mm of lowering when fitted as it allows the strut to sit higher into the body of the top mount. These new top mounts ship complete with new top cap spacers, made using our Black material - this additional part means no more modifying of original parts is required. If you wanted to fit our top mounts without the ride height change, you would need to fit part number PFF85-430BLK
Kjøp

Front Strut Top Mount Bush

kr 620,00
Nr 11 on diagram. Requires 2 per car.
Kjøp

Lower Engine Mount Small Bush

kr 500,00
Nr 5 on diagram. Requires 1 per car.
Kjøp

Front Engine Mount Dog Bone (Motorsport)

kr 620,00
Nr 8 on diagram. Requires 1 per car. Made in our hardest Black 95A material, this product is best suited to Track / Motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505
Kjøp

Steering Rack Mount Bush

kr 430,00
Nr 7 on diagram. Requires 1 per car.
Kjøp

Rear Beam Mounting Bush

kr 690,00
Nr 5 on diagram. Requires 2 per car. Fits 2WD models only. PFR85-415 has been superseded with PFR85-610.
Kjøp

Front Anti Roll Bar Link Bush Kit

kr 490,00
Nr 4 on diagram. Requires 2 per car. Fits plastic link rods only, for aluminium link rods use PFF85-412. Not for link rods with ball joints on the ends.
Kjøp

Front Anti Roll Bar Link Bush Kit

kr 610,00
Nr 4 on diagram. Requires 2 per car. Fits metal link rods only. For plastic link rods, use PFF85-413. These parts will not fit link rods with ball joint ends.
Kjøp

Front Anti Roll Bar Mount 23mm

kr 350,00
Nr 3 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.
Kjøp

Front Anti Roll Bar Mount 21mm

kr 350,00
Nr 3 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.
Kjøp

Front Anti Roll Bar Bush 19mm

kr 350,00
Nr 3 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.
Kjøp

Front Wishbone Rear Bush (Track/Race)

kr 1.430,00
Nr 2 on diagram. Requires 2 per car. This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use.
Kjøp

Front Wishbone Rear Bush, Pattern Arm

kr 610,00
Nr 2 on diagram. Requires 2 per car. This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410BLK
Kjøp

Front Wishbone Rear Bush

kr 610,00
Nr 2 on diagram. Requires 2 per car. Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PABLK and for cast arms use PFF3-610BLK.
Kjøp

Front Wishbone Front Bush 30mm Camber Adjustable

kr 770,00
Nr 1 on diagram. Requires 2 per car. PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201GBLK boosts stiffness over the original part by 15%.
Kjøp

Front Wishbone Front Bush 30mm

kr 510,00
Nr 1 on diagram. Requires 2 per car. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK.
Kjøp