PF Audi S6 (2012 – 2018) Original

Nr 43 on diagram. Requires 2 per car. This is an insert that fits into and fills the original voids in the original bush.

Nr 41 on diagram. Requires 1 per car. This is an insert to fit into the original bush to minimise the movement of the diff under acceleration.

Nr 26 on diagram Requires 1 per car. Made in our softestRed 65A durometer material, specifically for Diesel models. A small increase in NVH, usually at idle, should be expected whenstiffening the connecting mount between the engine/transmission and chassis.

Nr 26 on diagram Requires 1 per car A small increase in NVH, usually at idle, should be expected whenstiffening the connecting mount between the engine/transmission and chassis.

Nr 18 on diagram. Requires 4 per car.

Nr 17 on diagram. Requires 2 per side, totalling 4 per car. PFR3-715 is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.

Nr 16 on diagram. Requires 2 per side, totalling 4 per car.

Nr 14 on diagram. Requires 2 per car.

Nr 12 on diagram. Requires 2 per car. PFR3-712 is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.

Nr 11 on diagram. Requires 2 per car.

Nr 7 on diagram. Requires 4 per car. PFF3-913-10 fits vehicles with 170mm long anti roll bar links with a 10mm bolt. For 12mm bolts please use PFF3-913-12.

Nr 5 on diagram. Requires 4 per car. Fits bracket with bolts at each end, does not fit bracket with ball joint at each end.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti-roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti-roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 3 on diagram. Requires 4 per car. Allows you to fine-tune the front camber/caster/toe. Perfect for dialing in the alignment, improving the handling and minimizing tyre wear. The offset sleeve can give up to +/- 0.3 of camber.

Nr 3 on diagram. Requires 4 per car.

Nr 2 on diagram. Requires 2 per car. This part suits arms with a 75mm diameter bush, for 65mm bushes please use PFF3-802G. This is a replacement part that in our road series application is 35% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-702G provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-702.

Nr 2 on diagram. Requires 2 per car. This part suits arms with a 75mm diameter bush, for 65mm bushes please use PFF3-802. This is a replacement part that in our road series application is 35% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster adjustable option, please use PFF3-702G.

Nr 1 on diagram. Requires 2 per car. PFF3-701 is a reinforced replacement bush that is 18% stiffer than the original bush to revitalise bush performance and restore steering precision.