PF Audi S5 (2007 – 2016) Black Series

Nr 43 on diagram. Requires 2 per car. This is an insert that fits into and fills the original voids in the original bush.

Nr 41 on diagram. Requires 1 per car. This is an insert to fit into the original bush to minimise the movement of the diff under acceleration.

Nr 32 on diagram. Requires 2 per car. This is an insert to fit into and fill the voids in the original bush, for a replacement bush please use PFF3-732. A5 Notes:- Does not fit A5 FWD Coupe 4 cylinder models or A5 Quattro 4 cylinder models up to 11/15, (use PFR3-733 for both of these).

Nr 32 on diagram. Requires 2 per car. This is a replacement bush, for an insert that fits into the original bush OE number: 8K0505145C please use PFR3-733BLK, for an insert to fit the original bush OE number: 4G0505145C please use PFR3-735BLK.

Nr 30 on diagram. Requires 2 per car. This is an insert to fit into and fill the voids in the original bush, for a replacement bush please use PFF3-730. A5 Notes:- Does not fit A5 FWD Coupe 4 cylinder models or A5 Quattro 4 cylinder models up to 11/15, (use PFR3-731 for both of these).

Nr 30 on diagram. Requires 2 per car. This is a replacement bush, for an insert that fits into the original bush OE number: 8K0505145B please use PFR3-731BLK, for an insert to fit the original bush OE number: 4G0505145B please use PFR3-737BLK.

Nr 25 on diagram. Requires 1 per car. This insert is designed to limit transmission movement under load by providing additional stability to the top and bottom of the original mount. For the Audi A7, this part only fits front-wheel drive models.

Nr 18 on diagram. Requires 4 per car.

Nr 17 on diagram. Requires 2 per side, totalling 4 per car. PFR3-715BLK is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.

Nr 16 on diagram. Requires 2 per side, totalling 4 per car.

Nr 15 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering

Nr 15 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering

Nr 14 on diagram. Requires 2 per car.

Nr 12 on diagram. Requires 2 per car. PFR3-712BLK is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.

Nr 11 on diagram. Requires 2 per car.

Nr 7 on diagram. Requires 4 per car. PFF3-913-10 fits vehicles with 170mm long anti roll bar links with a 10mm bolt. For 12mm bolts please use PFF3-913-12.

Nr 5 on diagram. Requires 4 per car. Fits bracket with bolts at each end, does not fit bracket with ball joint at each end.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 3 on diagram. Requires 4 per car. Allows you to fine-tune the front camber/caster/toe. Perfect for dialing in the alignment, improving the handling and minimizing tyre wear. The offset sleeve can give up to +/- 0.3 of camber.

Nr 3 on diagram. Requires 4 per car.

Nr 2 on diagram. Requires 2 per car. This part suits arms with a 65mm diameter bush, for 75mm bushes please use PFF3-702. This is a replacement part that in our road series application is over 60% stiffer than or Road Series material. PFF3-802GBLK provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-802BLK.

Nr 2 on diagram. Requires 2 per car. This part suits arms with a 65mm diameter bush, for 75mm bushes please use PFF3-702. This is a replacement part that in our Black Series application is over 60% stiffer than our Road Series material.. For a caster adjustable option, please use PFF3-802GBLK.

Nr 2 on diagram. Requires 2 per car. This part suits arms with a 75mm diameter bush, for 65mm bushes please use PFF3-802G. This is a replacement part that in our road series application is 35% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-702G provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-702.

Nr 2 on diagram. Requires 2 per car. This part suits arms with a 75mm diameter bush, for 65mm bushes please use PFF3-802. This is a replacement part that in our Black Series application is over 100% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster adjustable option, please use PFF3-702GBLK.

Nr 1 on diagram. Requires 2 per car. PFF3-701BLK is a reinforced replacement bush that is 18% stiffer than the original bush to revitalise bush performance and restore steering precision.