PF Audi A6 (2011 – 2018) Black Series

Nr 18 on diagram. Requires 4 per car.

Nr 17 on diagram. Requires 2 per side, totalling 4 per car. PFR3-715BLK is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.

Nr 16 on diagram. Requires 2 per side, totalling 4 per car.

Nr 14 on diagram. Requires 2 per car.

Nr 12 on diagram. Requires 2 per car. PFR3-712BLK is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.

Nr 11 on diagram. Requires 2 per car.

Nr 7 on diagram. Requires 4 per car. PFF3-913-10 fits vehicles with 170mm long anti roll bar links with a 10mm bolt. For 12mm bolts please use PFF3-913-12.

Nr 5 on diagram. Requires 4 per car. Fits bracket with bolts at each end, does not fit bracket with ball joint at each end.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 4 on diagram. Requires 2 per car. Please check anti roll bar diameter before ordering.

Nr 3 on diagram. Requires 4 per car. Allows you to fine-tune the front camber/caster/toe. Perfect for dialing in the alignment, improving the handling and minimizing tyre wear. The offset sleeve can give up to +/- 0.3 of camber.

Nr 3 on diagram. Requires 4 per car.

Nr 2 on diagram. Requires 2 per car. This part suits arms with a 75mm diameter bush, for 65mm bushes please use PFF3-802GBLK. This is a replacement part that in our road series application is over 100% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-702GBLK provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-702BLK.

Nr 2 on diagram. Requires 2 per car. This part suits arms with a 75mm diameter bush, for 65mm bushes please use PFF3-802. This is a replacement part that in our Black Series application is over 100% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster adjustable option, please use PFF3-702GBLK.

Nr 1 on diagram. Requires 2 per car. PFF3-701BLK is a reinforced replacement bush that is 18% stiffer than the original bush to revitalise bush performance and restore steering precision.